WapluTM not only can be used in roadway, mining working face reinforcement, can also be used for
loose coal/coal wall/roof reinforcement; Consolidation of fault and broken formation; Fault, fracture
zone and collapse column reinforcement in advance.
Controllable and the reaction time can be adjusted according to the specific conditions of construction
site. Low initial viscosity, permeability is good, can be further fine cracks.The coal seam, rock formations
have excellent adhesion. Only trace foam products in a dry environment, the volume is almost no change.
Products can react with moisture in the bolt release nontoxic inert gas and secondary pressure, make
deep slurry to crack spread further, to the micro cracks have good repair effect.
WapluTM isA two-component modified polyurethane adhesive solution, including low viscosity resin and curing agent B.Liquid
resin and curing agent B in dozens of seconds, fast curing reaction generated by the molecular structure of
interpenetrating networks make the curing and high mechanical strength, high bonding strength, good
toughness and resistance to stamping properties. Resin, low viscosity, good fluidity, can effectively penetrate
into coal/tiny cracks in the rock.Non-toxic gases released during the process of reaction, in the purpose of construction and ensure the safety of
the site clean.
WapluTM Use Method & Matters Needing Attention
Coal seam reinforcement materials, gas hole sealing materials, will be A/B two components according to the
volume ratio 1:1 mixed in special grouting pump, after by special grouting injection gun ShiGongDian.Please
immediately after the completion of the construction of the grouting pump use detergent to clean.And will
not use up, seal and cut off from water vapor, the next time.