Rocsil Foam Foaming Composition
Rocsil Foam Foaming is made up of resin and catalyst for mine injection products, used in an airtight air
and gas, filling the gap hole and reinforce the coal and rock strata.Rocsil foam only need a double fluid
grouting pump and a system of the injection gun, made the power, the mine air pressure requirement
wind pressure is 0.4 to 0.7 Mpa, and high pressure pump output liquid pressure is seven times the
supply pressure of the wind.Two components of resin and catalyst with 4:1 mixture, the ratio of volume
of two components is automatically activated by the compressed air in the gun, rapid hair should generate
foam, foam volume rapid expansion to the original volume of 25 to 30 times, directly injected into the
processing area, after inflation, Luo Kexiu bubble hardening in a few minutes.
Rocsil Foam Foaming Advantage
②High inflation rate
③Good ability to work under pressure.
④Can be directly put out the fire.
⑤Construction technology is simple.
⑥Wide-range in application .